http://www.laserenthusiast.com/forums/blog.php LaserEnthusiast.com is a unbiassed full featured Laser Community for the Newbie or Expert Laser Enthusiast who enjoys building some wicked lasers! en Tue, 06 Jan 2009 21:59:04 GMT vBulletin 60 http://www.laserenthusiast.com/forums/images/dark_vb/misc/rss.jpg http://www.laserenthusiast.com/forums/blog.php http://www.laserenthusiast.com/forums/blog.php?b=28 Mon, 22 Dec 2008 19:01:40 GMT HIGH POWER LASER SPOT WELDER ENERGY STORAGE CAPACITOR - eBay (item 290284544983 end time Dec-28-08 20:18:29 PST)... HIGH POWER LASER SPOT WELDER ENERGY STORAGE CAPACITOR - eBay (item 290284544983 end time Dec-28-08 20:18:29 PST)

Description

	Item Specifics - Item Condition Condition: New Brand : Maxwell Type : Boostcap BCAP1500E

~FREE SHIPPING IN THE USA LIQUIDATION SALE, EVERYTHING MUST GO!!!~ LOT OF TWO!!! Title says it all!!! These are extremely high energy capacitors that were going tyo be used in the advanced fusion laser and portable mobile laser systems! Both of these systems need 10s of KILOAMPERES of current but at a short time, so how do you do this? With a few hundred of these and several high power thyristors! These capacitors can store over , ready, 5 KILOJOULES of energy!
I use two of these for a very nice spot welder, very easy to build yourself with a surplus parts! Heck, you can use 6 of them to start your car!
Very scary DISCLAIMER!!!! WARNING! DO NOT EVEN THINK OF SHORTING THIS CAPACITOR OUT WHEN CHARGED! IT CAN SOURCE ALMOST 400 AMPS SHORT CIRCUIT CURRENT, wrench vaporizer anyone?! USE YOUR HEAD, This is sold as a component only, whatever you decide to do with it is up to you. By bidding on this item you THE BIDDER accept solely and wholly all responsibility, liability, and risks that are possible with this item, Neither the SELLER or Ebay INC can be held liable!
Shipping is FREE in USA! Please see my other auctions for other neat scientific and industrial items. Thank you for looking!

---

		Select a picture

]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=28 http://www.laserenthusiast.com/forums/blog.php?b=27 Mon, 22 Dec 2008 18:48:37 GMT http://cgi.ebay.com/HIGH-POWER-LASER-SPOT-WELDER-ENERGY-STORAGE-CAPACITOR_W0QQitemZ290284544983QQcmdZViewItemQQptZBI_Electronic_Components?hash=item29...

Go to the site directly

]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=27 http://www.laserenthusiast.com/forums/blog.php?b=26 Sun, 07 Dec 2008 14:54:09 GMT http://kr.youtube.com/watch?v=2OCyPKp7dMM [media]http://kr.youtube.com/watch?v=2OCyPKp7dMM[/media] ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=26 http://www.laserenthusiast.com/forums/blog.php?b=25 Mon, 10 Nov 2008 18:28:40 GMT Finally after decades of depending on others to go fishing, on their schedule and fishing habits "some like to speed fish!" I have my own cheap little fishing boat!

It needs work, starting with the trailer wiring and lights, Motor needs to be tested and seats, storage and other amenities will be added.
Heres a few pics.





As you can see its nothing special, but it beats trying to fish from shore, while treading water, or depending on someone else, who's boat has left us in more than one occasion! ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=25 http://www.laserenthusiast.com/forums/blog.php?b=24 Sat, 01 Nov 2008 17:08:03 GMT Well its Saturday and my 30 working days trial at UPS has been fulfilled! WOOT! What a relief! I have also finished the long and difficult PMI... Well its Saturday and my 30 working days trial at UPS has been fulfilled! WOOT! What a relief!
I have also finished the long and difficult PMI training process, and have a growing fleet to attend to. The training was long and tedious and i'm glad its over with. Now I can concentrate on actually working on getting MY fleet in order.

Also I can now commit on the small fishing boat I have planned on rewarding myself with if I made it this far. ;) Its only a 14' aluminum john boat with a 10hp motor and trailer for $1000.00.
It will be nice to be able to take a weekend off and do some fishing without having to depend on someone else. God I hate that!

Another thing I have to look forward to is the % raise every 3 months until I'm up to full scale! in a years time, which is about $29.00 an hour! this is the most I have ever made on an hourly pay. Plus they provide the BEST insurance you can get which is nice at my tender age. LOL

With my income increasing, I will be able to pay my large credit card bill that I have acquired setting up and stocking our store, and concentrate on getting low cost Laser Diodes, once I get it paid off a bit.
I also plan on expanding the product line to include other items such as CREE Flashlights, I use the shit out of mine at work.. K-9 if your reading this, if you don't have one... get one... you will wonder how you have done without it for so long ;)

I'm watching Power Block "as usual" as I type this, ocne a Gear Head always a Gear Head!
I have been researching getting Stage 3 for my 2004 SRT-4 Neon which currently has Stage 2 with Toys which is producing around 280+hp. The Stage 3 will take it up to 380+hp :emoticon-0130-devil the HP per weight ratio is absolutely a rush. and since I drive about 90 miles a day, state to state. to go to work, having a car that is enjoyable to drive is a must in my book. and lets just say that wearing out a set a tires a year should be a good indication of my driving habits. and no its not all from tire spin, in fact its mostly from hammering through turns at high speeds... sorry can't help it, racing is in the family's DNA.



Oh and don't get me wrong, its been about 15 years since my last traffic ticket. That should be a Gunis record for me LOL! I have be driving modified Turbocharged vehicles for decades.

O.K. time for some coffee, enough rambling for now...


OH! how could I forget the new member of the family, since the little shit wakes me every morning at 6:00am "remember I work nights!". I found this little girl hiding under the steps to my Hot Tub after coming home from work. She was crying loudly, so I got my live trap and within minutes she was in the trap eating like a horse.
I brought her inside, fed her some more and noticed that she had a badly broken rear leg... SO off to the vet for a cast,
fast forward after 2 casts, the leg was so badly damaged we had it removed. now don't go ape shit on me, She didn't even blink an eye! as soon as she came to after the removal, she was purring and as happy as could be. The little turd runs around the house like a rocket with her 3 legs. She's young enough to deal with it just fine.

She's become my little baby, sleeps with me, trys to find nipples in my hair LMFAO. guesss she thinks I'm her mommy.
Anyways hers a pic of her.

]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=24 http://www.laserenthusiast.com/forums/blog.php?b=23 Sat, 01 Nov 2008 16:42:28 GMT Well. I got board and wanted to see what the LPF was up to. And no surprise there was thread after thread of bitching whining and cutthroat... Well. I got board and wanted to see what the LPF was up to.

And no surprise there was thread after thread of bitching whining and cutthroat sales.

I see LaserTurd still has to grow up, posting thread after thread of childish crap.

advertising out the ass with aggravating full page pop-up ads, Several group buys on the same diodes, each one a different price causing all kinds of problems!!! LOL.

What a mess! Makes me feel better about how organized this site remains. But I still have to wonder... why does a site that is in such turmoil have more activity?

What are we doing wrong here? Software? format? I don't know... What do you think? ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=23 http://www.laserenthusiast.com/forums/blog.php?b=22 Fri, 31 Oct 2008 01:51:36 GMT I was so sad this early morning and couldn't sleep any more. Because I bought a 532nm 50mw laser pointer, remodeled it to make power about 90mw. Last night, showed it to the best friend, but it didn't work. I checked it with the left eye, toggled the button. It's less than 1m between my eyes and the pointer. Suddenly I heard sth sizzled, the left eye was totally in darkness,some red and white points in darkness, irregular points... I went to bed in deep sollow.

This morning, the left eye couldn't see anything clearly. I went to hospital and took these photos. The laser pointer isn't funny, it's extremely dangerous. The laser pointer can hurt your eye,blind people easily.

http://www.beamq.com/page.html?chapter=10&id=118

]]> beamq http://www.laserenthusiast.com/forums/blog.php?b=22 http://www.laserenthusiast.com/forums/blog.php?b=21 Thu, 30 Oct 2008 19:20:31 GMT Good for him!!!
Surprised CBS let him get away with this even though he's right




Right on, Andy Rooney !

Andy Rooney said on '60 Minutes' a few weeks back:

I don't think being a minority makes you a victim of anything except numbers.. The only things I can think of that are truly discriminatory are things like the United Negro College Fund, Jet Magazine, Black Entertainment Television, and Miss Black America. Try to have things like the United Caucasian College Fund, Cloud Magazine, White Entertainment Television, or Miss White America; and see what happens...Jesse Jackson will be knocking down your door.

Guns do not make you a killer. I think killing makes you a killer. You can kill someone with a baseball bat or a car, but no one is trying to ban you from driving to the ball game.

I believe they are called the Boy Scouts for a reason, which is why there are no girls allowed. Girls belong in the Girl Scouts! ARE YOU LISTENING MARTHA BURKE ?

I think that if you feel homosexuality is wrong, it is not a phobia, it is an opinion.

I have the right 'NOT' to be tolerant of others because they are different, weird, or tick me off.

When 70% of the people who get arrested are black, in cities where 70% of the population is black, that is not racial profiling; it is the Law of Probability.

I believe that if you are selling me a milkshake, a pack of cigarettes, a newspaper or a hotel room, you must do it in English! As a matter of fact, if you want to be an American citizen, you should have to speak English!

My father and grandfather didn't die in vain so you can leave the countries you were born in to come over and disrespect ours.

I think the police should have every right to shoot you if you threaten them after they tell you to stop. If you can't understand the word 'freeze' or 'stop' in English, see the above lines.

I don't think just because you were not born in this country, you are qualified for any special loan programs, government sponsored bank loans or tax breaks, etc., so you can open a hotel, coffee shop, trinket store, or any other business.

We did not go to the aid of certain foreign countries and risk our lives in wars to defend their freedoms, so that decades later they could come over here and tell us our constitution is a living document; and open to their interpretations.

I don't hate the rich; I don't pity the poor

I know pro wrestling is fake, but so are movies and television That doesn't stop you from watching them.

I think Bill Gates has every right to keep every penny he made and continue to make more. If it ticks you off, go and invent the next operating system that's better, and put your name on the building.

It doesn't take a whole village to raise a child right, but it does take a parent to stand up to the kid; and smack their little behinds when necessary, and say 'NO!'

I think tattoos and piercing are fine if you want them, but please don't pretend they are a political statement. And, please, stay home until that new lip ring heals. I don't want to look at your ugly infected mouth as you serve me French fries!

I am sick of 'Political Correctness.' I know a lot of black people, and not a single one of them was born in Africa ; so how can they be 'African-Americans'? Besides, Africa is a continent. I don't go around saying I am a European-American because my great, great, great, great, great, great grandfather was from Europe. I am proud to be from America and nowhere else

And if you don't like my point of view, tough...

I PLEDGE ALLEGIANCE TO THE FLAG, OF THE UNITED STATES OF AMERICA , AND TO THE REPUBLIC, FOR WHICH IT STANDS, ONE NATION UNDER GOD, INDIVISIBLE, WITH LIBERTY AND JUSTICE FOR ALL!

It is said that 86% of Americans believe in God. Therefore I have a very hard time understanding why there is such a problem in having 'In God We Trust' on our money and having 'God' in the Pledge of Allegiance. Why don't we just tell the 14% to BE QUIET!!! ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=21 http://www.laserenthusiast.com/forums/blog.php?b=20 Mon, 13 Oct 2008 00:57:18 GMT Image: http://www.beamq.com/bmz_cache/c/c0a082738147d69d3882b31941659bfa.image.733x550.JPG ]]> beamq http://www.laserenthusiast.com/forums/blog.php?b=20 http://www.laserenthusiast.com/forums/blog.php?b=19 Sat, 20 Sep 2008 20:56:21 GMT When it comes to purchasing parts for my Laser builds, I'm in the same boat your in. Shopping MANY different sites and pricing them all and then there is that ever so long wait just to receive those parts.

Well that has changed!
We here at LaserEnthusiast.com have opened our own Laser Parts store at www.LaserSurplusParts.com! We will offer the best prices possible, fastest shipping, and a better selection! PLUS unlike others our Store is backed by our Staff in our Forum!
Now thats one stop shopping!

We are new and in the process of aquiring stock. MANY orders are on the way, and should be in within the week. Take advantage of our store by REGISTERING so you can receive our NEWS LETTER, access your own WISH LIST and to be notified when New Stock and Parts arrive.

Everyone is welcome, including ALL SUPPLIERS and BUILDERS. If your looking to move your Laser related merchandise, Just email me at sales@lasersurplusparts.com for more information on how to have your products added to our store. ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=19 http://www.laserenthusiast.com/forums/blog.php?b=18 Fri, 19 Sep 2008 04:14:11 GMT Wavelength : 660nm±5nm Power : 200mW Operation: ON/OFF touching button Project distance : 25000feet away. Battery: 18650 Safety Certificate : Meet... Wavelength : 660nm±5nm
Power : 200mW
Operation: ON/OFF touching button
Project distance : 25000feet away.
Battery: 18650
Safety Certificate : Meet FDA OR CE
http://www.beamq.com/200mw-red-laser...lack-p-83.html ]]> beamq http://www.laserenthusiast.com/forums/blog.php?b=18 http://www.laserenthusiast.com/forums/blog.php?b=17 Fri, 19 Sep 2008 04:12:36 GMT Image: http://www.beamq.com/bmz_cache/4/42f17c3a4638eca69a47b91b16d16abe.image.733x550.JPG This sale is a pair of high quality laser goggle that can...
This sale is a pair of high quality laser goggle that can block green laser beam with wavelength 532nm .
Do not look direct at the laser beam in any circumstance even with this goggle. Once you put this goggle on, you shouldn't be able to see the laser light at all. If you do, please turn off the laser immediately as the goggle is either defective or with a wrong label! Contact us immediately.

http://www.beamq.com/new-532nm-green...lass-p-87.html ]]> beamq http://www.laserenthusiast.com/forums/blog.php?b=17 http://www.laserenthusiast.com/forums/blog.php?b=16 Fri, 15 Aug 2008 19:36:22 GMT Is this worth the US $19.99 ? Image: http://i12.ebayimg.com/04/i/001/05/64/0446_12.JPG One Raico Crystal. High power. 532nm. Size: 4x4x7mm. Both... Is this worth the US $19.99 ?



One Raico Crystal. High power. 532nm. Size: 4x4x7mm. Both ends are AR coated. New in the box from old stock.

http://cgi.ebay.com/RAICOL-LASERSCOPE-KTP-LASER-CRYSTAL-SHG-4x4x7mm-DBAR-NR_W0QQitemZ280256749346QQcmdZViewItem?hash=item28 0256749346&_trkparms=72%3A635|39%3A1|66%3A2|65%3A12|240%3A131 8&_trksid=p3286.c0.m14
]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=16 http://www.laserenthusiast.com/forums/blog.php?b=15 Fri, 15 Aug 2008 19:25:03 GMT $70.00 Buy it Now. Nice price! Attachment 1 (http://www.laserenthusiast.com/forums/attachment.php?attachmentid=1) 200mw 650nm Red Dot Laser for Lab... $70.00 Buy it Now. Nice price!



200mw 650nm Red Dot Laser for Lab Use

Brand new 200mw 650nm red dot laser for lab, machine, manufacturing and for laser projector replacement.

• Size: Φ(26mm x 100mm)
• Wavelength: 650nm
• Output Power: 200mw
• Operating Current: 280mA
• Operating Voltage: 5.0vdc
• Operating Mode: CW
• Optics: Coated Glass Lens
• Beam Divergence: 0.2~1.5mard
• Operating Temperature: -10℃~75℃
• Storage Temperature: -40℃~85℃

Suggestion:

Power supply requirements: output 5vdc----500mA

In order to make sure the laser working well, it is better to buy our special laser power supply for the laser together.

http://cgi.ebay.com/200mw-650nm-laser-module-for-lab-uses-with-TTL_W0QQitemZ110278895554QQcmdZViewItem?hash=item1 10278895554&_trkparms=72%3A635|39%3A1|66%3A2|65%3A12|240%3A131 8&_trksid=p3286.c0.m14 ]]> High Octane http://www.laserenthusiast.com/forums/blog.php?b=15 http://www.laserenthusiast.com/forums/blog.php?b=13 Thu, 14 Aug 2008 01:47:05 GMT *Introduction:* Utilization of the latest laser crystal technology and optics creates this high quality;pen-sized Laser Pointer. It emits an intense,... Introduction:
Utilization of the latest laser crystal technology and optics creates this high quality;pen-sized Laser Pointer. It emits an intense, brilliant laser beam and has a range up to 1000 meters. Use your laser pointer to aim at any desired targets on projection screens,video monitors, presentation graphics, and any opaque as far as several hundred meters. Elegant gift box included.

User Safety Precautions:
Under normal operation,it is safe to the human body.
Focusing directly on a laser beam may result in temporary or permanent eye damage. Care should always be taken.

Battery Installation:
When inserting the batteries ALWAYS point the laser emission hole away from your eye.
Unscrew the pen clip from the pen. Insert batteries positive end upward and tightly screw the pen clip.
Must use AAA size alkaline batteries.

Operation:
Presss the push button to turn it on.
Release the push button to shut if off automatically.
Operating temperature: 15-35 degree.
This pointer is not designed for long-term use.
Constantly turning on will return accumulation of high temperature and sacrifice the lifetime of laser diode.

http://www.beamq.com/100mw-black-gre...nter-p-82.html ]]> beamq http://www.laserenthusiast.com/forums/blog.php?b=13